Drill America 4"-8 NPT Pipe Tap, Carbon Steel, DWTPT Series
Nеw Arrіvаlѕ Drill America 4-8 NPT Pipe Tap, Carbon Steel, DWTPT Series Simple review
So you can check out the other reviews at Amazon.com
only with $
- Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shank with square end
- Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction
From the manufacturer
NPT Taps
Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
 |  | |
|---|---|---|
| Carbon Steel NPT Pipe Taps | High-Speed Steel NPT Pipe Taps | |
| Material | Carbon Steel | High Speed Steel |
| Cleaning Threads in All Materials | ✓ | ✓ |
| New Threads in Soft Materials Ex: Plastic | ✓ | ✓ |
| New Threads in Harder Materials Ex: Metal | Not Recommended | ✓ |
About National Pipe Taper (NPT) Taps
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
- The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.
- NPT threads require the use of a “sealer” like teflon tape or pipe compound.
Product Description
Drill America DWTPT series Qualtech carbon steel pipe tap is designed to clean and/or re-thread damaged or jam pipe threads. It is appropriate for threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.
Product Specifications
Specification for this product family
HIGH QUALITY Prоduсt Chесk Hеrе Nоw :
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Drill America 4-8 NPT Pipe Tap, Carbon Steel, DWTPT SeriesThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу Drill America 4-8 NPT Pipe Tap, Carbon Steel, DWTPT Series рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------
0 Response to "Drill America 4"-8 NPT Pipe Tap, Carbon Steel, DWTPT Series"
Post a Comment